Zeiss CIRRUS photo 600, Manual

Page: 39 / 106

Operation of the device
000000-2121-813-GA-GB-050416
31
Operation using the control panel on the instrument
base
Internal fixation target/external
fixation lamp (1, Fig. 10) Switch between internal fixation target
and external fixation lamp
Position of the internal fixation
target (2 and 5, Fig. 10)
Fundus images:
Move the fixation target for the patient
when using the multiple fields method
(see software description file): select
previous/next fixation target positions to
correct the image sequence or to repeat
an image capture
OCT and combination mode:
Switch between fundus alignment image
and OCT alignment image
Correction value for automatic
flash or adjustment of flash light
level with no automatic flash (see
software description file)
(3 and 4, Fig. 10)
•
Increment with +
•
Decrement with -
Attention mode (6, Fig. 10) Fundus images:
Causes the internal fixation target to
flash three times, aiding the patient to
locate it quickly
OCT and combination mode:
Starts OCT signal optimization
(analogous to Optimize button)
1 Switch between internal fixation
target and external fixation lamp
2 Move internal fixation target to next
position/Change to another mode
3 Increase flash light level
4 Reduce flash light level
5 Move internal fixation target to
previous position/Change to another
mode
6 Attention mode/OCT signal
optimization
Fig. 10 Control panel on instrument base
Coarse and fine adjustment of the device in front of the patient's eye can be
achieved by shifting the instrument base using the joystick.
For further information on software operation and positioning of the device
please see the software description file in online help, accessible via menu
item Help topics in the Help menu.