![background image](http://html2.mh-extra.com/html/zeiss/axio-zoom-v16/axio-zoom-v16_operating-manual_3350140017.webp)
SET-UP
Axio Zoom.V16
General information
Carl Zeiss
05/2012
435080-9030-701
17
3
SET-UP
3.1
General information
Because of the complexity of the equipment and to ensure correct function, the instrument will be
installed and set up for use on site by your Zeiss customer service team.
This includes the following services:
−
Set-up and adjustment of all components
−
Connecting cables and supply lines
−
Firmware installation (ex works) and configuration
−
Training
carefully prior to set-up and operation (see Section 1.2,
page 8).
The column is supplied with the focusing drive installed. Do not lift or carry the device by the
focusing drive!
If more than one CAN component is used, these can be connected either to each other or to
the focus motor. In such cases only
one
power supply unit may be connected to the
microscope system.
Do not transport the installed, upright standing system over long distances. Avoid severe shocks
to the focusing drive, as this could damage the rack of the column. See Section 5.2.2, page 58.
After installing and connecting the instrument, the mechanical end stops must be adjusted for
the travel of the motorized focusing drive (see Section 4.6, page44).
Provide sufficient space for setting up the add-on units (required bench area is approx. W x D:
800
×
800 mm).
The Axio Zoom.V16 is normally delivered together with the required tools and optional accessories in
several packages.
•
Remove all components from the packaging and check that all components described on the delivery
note are present.
•
Remove all shipping braces (adhesive tape or similar).
•
Keep the original packaging for storage or for returning the instrument to the manufacturer, or
dispose of it properly.
•
Some components are supplied in special packaging, e.g. the PlanApo Z objective. You are strongly
advised to use the special packaging for storing these components during extended periods of non-
use or for shipping.
Summary of Contents for Axio Zoom.V16
Page 1: ...Operating Manual Axio Zoom V16 Zoom microscope...
Page 2: ......