SET-UP
Axio Zoom.V16
Installing and connecting the human interface panel (HIP)
Carl Zeiss
05/2012
435080-9030-701
23
3.5
Installing and connecting the human interface panel (HIP)
The HIP can be swiveled by about 30° around its longitudinal axis to achieve a convenient
viewing angle. Be sure not to exceed the stated swivel range. Forcible twisting may result in
damage to the device.
The plug-in power supply is supplied with four plug adapters (EURO, US, UK, AUS). Before
connecting it to the power outlet, choose the appropriate adapter and push it onto the plug-in
power supply.
Install the HIP (Fig. 8/
3
) to the microscope body (zoom function) or motorized focusing drive (focus
function) as follows:
Fig. 8
Installing the HIP control unit
•
Remove the cover (right) from the microscope body or focusing drive (Fig. 8/
1
).
•
Pull out the connecting cable (Fig. 8/
7
) slightly without applying force and connect it carefully to the
corresponding HIP connector socket.
•
Push the cable fully back into the casing without bending it; carefully attach the HIP so that the nose
(Fig. 8/
2
) on the HIP engages in the groove provided (Fig. 8/
8
).
•
Screw in the socket head screw (SW 3) (Fig. 8/
6
) as far as it will go using the ball-head screwdriver
5
).
•
Push the cover cap onto the HIP (Fig. 8/
4
).
•
Connect the plug-in power supply to the mains supply.
Summary of Contents for Axio Zoom.V16
Page 1: ...Operating Manual Axio Zoom V16 Zoom microscope...
Page 2: ......
