OPERATION
Carl Zeiss
Settings
Axio Zoom.V16
46
435080-9030-701
05/2012
9.
Now set the minimum zoom again and correct for any existing image blurring by separately turning
the diopter-setting rings of the focusing eyepieces to compensate for defective vision.
Once the microscope has been adjusted in this way, the image will remain focused throughout the entire
zoom range.
If desired, connect a camera of your choice to the camera port (Fig. 30/
1
) of the ergo phototube or
binocular phototube (Fig. 31/
2
). To switch over the light path, briefly push the control knob (Fig. 30/
4
) of
the ergo phototube or pull out the push-pull rod (Fig. 31/
3
) of the phototube. The right light path is
reflected 100% to the camera. On the ergo phototube this will be indicated by the blue control lamp
(Fig. 30/
3
) lighting up.
A stereo effect in the eyepiece image can be obtained by pulling out the shutter slider (Fig. 30/
2
) on the
ergo phototube.
After a change of operator, repeat steps
3
. and
4
.
After a change of objective, repeat steps
5
. to
8
.
Summary of Contents for Axio Zoom.V16
Page 1: ...Operating Manual Axio Zoom V16 Zoom microscope...
Page 2: ......
