1 0
y t
Make sure that the bike is properly positioned
on the rear axle stand.
Carefully remove the cable tie with a wire cut-
ter. Then remove the bubble wrap as well as
the protective foam from the rear derailleur.
Screw the derailleur to the derailleur hanger
(5 mm allen key).
Use the torque wrench to properly fasten the
derailleur bolt. Make sure that the tab of the
derailleurs rests against the corresponding
tab on the derailleur hanger. Hold the derail-
leur firmly in position with your other hand to
avoid cross-threading and to make sure no
gap is left.
3.1.1
3.1.2
3.1.3
3.1.4
Rear derailleur screw //
8 – 10 Nm
REAR DERAILLEUR ASSEMBLY
SHIMANO DEORE XT // SLX
Please follow the
torque specifications of
the manufacturers:
