y t
1 5
EN
Place the front wheel in the fork. Take care
when inserting the brake rotor in the caliper
to avoid causing damage. Lightly grease the
front axle.
On
FOX forks
, the axle should be inserted
from the
non-drive side
, whereas on
RockSh-
ox forks
it should be inserted from the
drive
side
. Insert the lightly greased axle as far as
it will go, then secure it by rotating it in the
clockwise direction.
FRONT WHEEL ASSEMBLY
Tighten the axle by hand until it sits parallel to
the fork, in order to properly secure the wheel.
The axle is delivered already adjusted. Once
the lever is tight and parallel to the stanchion,
the wheel is secure.
Please also observe the
manufacturer’s advice!
FOX / ROCKSHOX
TIP!
Please do not inflate the tires beyond
the maximum pressure as indicated on the
tire. The optimal tire pressure depends on
the rider’s weight, the terrain, and personal
preferences. If you have further questions
please contact our customer service:
.
Too low tire pressure leads to:
• lack of control
• risk of damage to tires, tubes, and rims
• sudden tire pressure loss
Too high tire pressure leads to:
• significantly less grip
• lack of comfort
• sudden tire pressure loss
5.2.2
5.2.1
5.2.3
