1 1 0
y t
Release all the air from the fork before you
continue. Attach a foam wrapper to the fork
bridge with a zip tie. Also protect the fork legs,
either with carton or foam wrappers.
Attach the remaining carton protectors to the
frame and place the bike
IN the BikeBox
on
the front and rear axle stands. Fill the space
behind the rear axle stand with rear spacers
to prevent the bike from sliding around in the
BikeBox.
Place the wheels next to the bike. To ensure
their stability, there are slots provided in
the bottom of the BikeBox. Now secure the
wheels, frame, and handlebar with the Top
Box.
Attach the wheel covers on the side of the
brake rotor and then join the two wheels to-
gether with a zip tie. Attach the wheel spacer
to the front wheel with a zip tie (see illustra-
tion).
Attach the sensor cable to the brake mount
with adhesive tape. Wrap the chain stays and
seat stays (drive side) with foam wrappers
and secure them with cable ties. Secure the
middle part of the chain with a zip tie and
make sure that there is enough padding be-
tween the chain and the chainstay to avoid
any contact.
Remove the Di2 cable (if present) from the
derailleur
with the specific Shimano tool
.
Then remove the derailleur from the derail-
leur hanger to avoid causing any damage to
the frame. Wrap the derailleur in bubble-wrap
and secure it with a zip tie.
1.
2.
3.
5.
6.
7.
ZWROT / SERWIS
PAKOWANIE
