1 8
y t
SEAT POST
TIP!
How to set the correct saddle height: Sit
on the saddle, place your heel on the pedal
and rotate the crank to the lowest positi-
on. Your leg should be fully straight in this
situation.
Observe the minimum insertion depth of the
dropper post.
You can find additional infor
-
mation in the manufacturer’s manual.
To remove and replace the dropper post you
must remove the battery and release the ca-
ble clamp in the downtube. The cable must
then be re-positioned properly and the cable
clamp secured again.
Failure to do so may cause damage to the
cable routing of the seat post.
10.
Light cable
Electrical wire
Power cable
Dropper post
Brake cable
Shift cable
CABLE ROUTING
We added a rubber seal for the YT Postman
dropper post to your ToolBox. Slide it onto the
dropper post right above the clamp and tight-
en the bolt to keep the dirt out.
YT POSTMAN (PRO / COMP / BASE)
