y t
1 3
4.2.2
EN
Tighten the axle by hand to approximately
10 – 15 Nm of torque.
Push the axle in as far as it will go, then begin
to fasten it by turning the lever in the clock-
wise direction.
Pivot the derailleur towards the rear and place
the wheel in the frame, the built-in frame
guides will help you position the wheel cor-
rectly. Make sure to place the chain on the
smallest cog.
REAR WHEEL ASSEMBLY
By pulling the lever outwards you can adjust
its position. Align the lever handle in the for-
ward direction along the seatstay to minimize
the risk of damage to the lever. Place the
clutch lever (see picture 1) back in the
“On”
position
to engage the clutch.
Move the clutch lever to the
“Off” position
as
indicated in the illustration. The
“On” position
engages the clutch which makes it harder to
handle the chain..
Rear wheel axle //
10 – 15 Nm
Please follow the
torque specifications of
the manufacturers:
4.2.1
4.2.3
4.2.4
4.2.5
