y t
1 1 5
DISPOSAL
BATTG / ELEKTROG
1. DISPOSAL OF BATTERIES ACCORDING TO BATTG
The symbol of the crossed-out wheelie bin iden-
tifies batteries that contain harmful substances
which obliges you as a consumer to dispose of
them properly. Used batteries may contain harmful
substances which, if not properly stored or disposed
of, could damage the environment and your health.
In addition, batteries contain important raw materi-
als such as iron, zinc, manganese or nickel, which
can be recycled after you return the batteries. For
this reason, you must not dispose of batteries with
household waste, but must return them after use to
a specialty store, at a municipal collection point or
to us at the following address:
YT Industries GmbH
Pilatus Campus 9
91353 Hausen
Germany.
Note that we only take back batteries that are part
of our current or historical range of products. In ad-
dition, we only take used batteries back in a quanti-
ty that corresponds to the normal consumption of
each single end user.
2. DISPOSAL OF USED APPLIANCES ACCORDING TO
ELEKTROG
As a consumer, you are also obliged to dispose of
used electric and electronic equipment appropriate-
ly. Return all such equipment to a designated local
collection point or a specialist shop after you are
done with it.
If you have any further questions please write to
.
• WHEN NOT IN USE, THE BATTERY SHOULD BE
RECHARGED EVERY THREE MONTHS AT A MINIMUM.
• BATTERIES SHOULD NEVER BE BURNED,
DISASSEMBLED, OR SHORT-CIRCUITED.
• WHEN THE PERFORMANCE OF THE BATTERY IS
SIGNIFICANTLY REDUCED, THE BATTERY SHOULD
BE REPLACED.
• PLACE THE BATTERY IN A WELL-VENTILATED AREA
FOR CHARGING.
• NEVER PLUG THE BATTERY CHARGER INTO AN
EXTENSION CORD, ALWAYS CONNECT IT DIRECTLY
TO THE WALL SOCKET.
CHARGING INSTRUCTIONS
C A R E I N F O R M A T I O N
Your carbon frame needs regular care. Common
paint care products with or without silicon additives
and cold to lukewarm water are suitable for cleaning.
You can add common dish detergents to the cold to
lukewarm water.
All solvents must be avoided:
•
alcohols (e.g. ethanol or isopropanol)
•
hot water with alkaline additives
•
do not clean with steam jets or high-pressure
cleaners
Check whether your frame has external damage at
regular intervals (e. g. during maintenance):
•
cracks
•
paint damages
•
discoloration
•
deformation (bulges, etc.)
S U R FA C E P R O T E C T I O N
YT Industries carbon frames are equipped with
protective foils or protectors made of polyamide or
polyurethane at points which are exposed to particu-
lar stress.
Other points could form due to different application
areas and conditions (e.g. wearing knee protectors).
These areas must be protected against damage or
abrasions with additional protective foils.
•
Please check at regular intervals whether the
protective foils are still functional.
•
We recommend replacing the protective foil around
tension points once a year.
PL
