SAFETY NOTES
TECHNICAL SUPPORT AND WARRANTY INFORMATION
Contact information for technical support and warranty information on YSI’s Environmental
Monitoring Systems products can be found in
Section 8, Warranty and Service Information
.
COMPLIANCE
When using the YSI 6-Series sondes in a European Community (CE) country, please be aware
that electromagnetic compatibility (EMC) performance issues may occur under certain
conditions, such as when the sonde is exposed to certain radio frequency fields.
If you are concerned with these issues, consult the Declaration of Conformity that was enclosed
with your instrument. Specific conditions where temporary sensor problems may occur are listed
in this document.
If you are unable to locate the Declaration of Conformity that was shipped with your instrument,
contact your local YSI representative, or YSI Customer Service in Yellow Springs, Ohio for a
copy of the document. See
Section 8, Warranty and Service Information
for contact
information.
SPECIFICATIONS
For general specifications for all YSI Environmental Monitoring Systems products included in
this manual, please see
Appendix M, Specifications
.
GENERAL SAFETY CONSIDERATIONS
For Health and Safety issues concerning the use of the calibration solutions with the sondes,
please see
Appendix A, Health and Safety
.
NOTICE
Information contained in this manual is subject to change without notice. Effort has been made
to make the information contained in this manual complete, accurate, and current. YSI shall not
be held responsible for errors or omissions in this operations manual.
WARNING:
When caring for your sonde, remember that the sonde is sealed at the factory, and there is never
a need to gain access to the interior circuitry of the sonde. In fact, if you attempt to disassemble
the sonde, you would void the manufacturer's warranty.
