Ypsomed OmniPod my life, User Manual

Page: 77 / 186

Using the Personal Diabetes Manager
64
6
4. Correction factor —You can edit existing time segments and
add segments, up to a total of 8.
a. To edit an existing correction factor time segment, choose
the segment, then press Edit . Use the Up/Down Control-
ler buttons to choose a new start time, end time, and cor-
rection factor. Press Next after each entry.
b. To add a segment, choose [add new] , then press New .
Use the Up/Down Controller buttons to choose a start
time, end time, and correction factor. Press Next after
each entry.
c. When you have completed all time segments, press
Done , then Save .
5. Reverse correction —Choose On or Off , then press Next .
6. Insulin action (duration) —Use the Up/Down Controller
buttons to choose a duration of insulin action , then press
Done .
7. Press OK .
Ratios/factors/targets
When the suggested bolus calculator is turned On , you can view
and change all the settings using the Ratios/factors/targets
menu option. Choose Review all settings , then press Select
(Figure 6-8a) or choose one setting from the menu, then press
Select (Figure 6-8b). The steps are the same whether you choose
all settings or individual ones.
Figure 6-7
Figure 6-8a Figure 6-8b