Ypsomed OmniPod my life, User Manual

Page: 33 / 186

Understanding and Adjusting Basal Rates
20
3
3. Choose the program you want from the list (Figure 3-7), then
press Enable .
4. Press Enable again to start the selected basal program. If a
Pod is active, the PDM beeps to indicate that the chosen
basal program is running.
Change, rename, copy, or delete a basal program
1. On the Home screen, use the Up/Down Controller buttons
to choose Settings ; then press Select .
2. Choose Basal programs , then press Select .
3. Choose a program from the list, then press Select .
To view the segments of the basal program
1. Choose View , then press Select (Figure 3-8).
Figure 3-7
A diamond icon (
♦
) appears next to the program that
is active. You cannot select the active program to
enable it, because it is already running.
As a safety feature, you cannot enable a new basal
program while a temporary basal program is in pro-
cess (see “Temporary Basal Rates and Presets” later in
this chapter); you must first cancel the active tempo-
rary basal program.