Ypsomed OmniPod my life, User Manual

Page: 34 / 186

Understanding and Adjusting Basal Rates
21
3
To edit or add a segment or rate in the basal program
1. Choose Edit , then press Select .
2. Choose the segment to change, then press Edit (Figure 3-9).
Or, choose [add new] , then press New .
3. Enter a start time for the segment you want to change, then
press Next .
4. Enter an end time for this segment, then press Next .
5. Enter a basal rate for the new segment, then press Enter .
6. To save the newly entered segment into the basal program,
press Save (Figure 3-10). If you want to make additional edits,
repeat steps 2–5.
7. To see the program as a list, press List . To see the graph again,
press Graph .
As a safety feature, you must suspend insulin delivery
before editing an active basal program (see Chapter
5, Using the Pod). Remember to resume delivery after
the edits are made.
Figure 3-8 Figure 3-9
Figure 3-10