YOKOGAWA WT500 User Manual Download Page 41

Page: 41 / 360

2-18

IM 760201-01E

Numeric Display during Harmonic Measurement (See section 6.1 for operating instructions)

In addition to the 4, 8, 16, matrix, and All displays, list displays (the single list and double
list displays) are also available.

Selecting the Number of Displayed Items

Just as in ordinary measurement, the number of items can be selected from 4, 8, 16,
Matrix, and All Items.

List Display

For each measurement function, the numeric data for each harmonic can be displayed in
two columns.

• Single List

The data of a single measurement function can be divided into even and odd harmonics

and displayed. The selectable measurement functions are U, I, P, S, Q,

U, and

Measurement function 1

Data of each harmonic order

Relative harmonic content of each harmonic

(Uhdf, Ihdf, and Phdf are displayed when the

selected measurement function are U, I, and

P, respectively.)

Numeric data of each

harmonic order

Measurement function display

Data related to all harmonics

• Dual List

The data from two different measurement functions can be displayed in two separate

columns. The selectable measurement functions are U, I, P, S, Q,

U, and

Measurement function 1

Measurement function 2

Data of each harmonic order

Relative harmonic content of each harmonic

(Uhdf, Ihdf, and Phdf are displayed when the

selected measurement function are U, I, and

P, respectively.)

Numeric data of each

harmonic order

Measurement function display

Data related to all harmonics

Scrolling through Pages

Just as in ordinary measurement, you can scroll through pages one page at a time.

Resetting the Numeric Display

If the number of displayed items is set 4, 8, 16, or matrix, the display order of
measurement functions can be reset to the factory default configuration.

2.4 Power Measurement

Summary of Contents for WT500









































































































































































































































































































































































Search results

Summary of Contents for WT500

Reviews:

Related manuals for WT500

Brands by name

Popular brands

YOKOGAWA WT500, User Manual

Search results

Summary of Contents for WT500

Reviews:

Related manuals for WT500

Brands by name

Popular brands