manualshive.com logo in svg

YOKOGAWA WT500, User Manual

Share
Download
YOKOGAWA WT500 User Manual Download Page 168

5-42

IM 760201-01E

5.17  Setting Delta Computation (Optional)

Procedure

Selecting the Target Wiring Unit for Delta Computation

For information about selecting a wiring unit, see section 4.2, “Selecting a Wiring 
System.”
(Depending on the wiring system, this operation may not be necessary.)

Selecting a Delta Computation Type

1.

  Press 

SETUP

 to display the Setup menu.

If the full Setup menu does not appear, proceed to step 2. If the full Setup menu appears, 
proceed to step 4.

2.

  Use the 

cursor keys

 to select Details.

3.

  Press 

SET

 to display the full Setup menu.

4.

  Use the 

cursor keys

 to select Delta Measure.

5.

  Press 

SET

 to display the Delta Measure Settings dialog box.

6.

  Use the 

cursor keys

 to select Meas Type.

(The menu varies depending on the wiring system.)

7.

  Press 

SET

 to confirm the selection.

 

 

     

Selecting a Delta Computation Mode

8.

  Use the 

cursor keys

 to select 

Δ

F Mode.

9.

  Press 

SET

 to set the delta computation mode to rms, mean, dc, r-mean, or ac.

 

 

     

Summary of Contents for WT500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands