manualshive.com logo in svg

YOKOGAWA WT500, User Manual

Share
Download
YOKOGAWA WT500 User Manual Download Page 172

6-2

IM 760201-01E

6.2  Changing Numeric Data Display Items

Make sure that the display mode is Numeric.

There are four ways that you can change numeric data display items. They are listed 
below, along with the page numbers for their corresponding operating instructions.
•  By using the function select menu to change the displayed items.
•  By selecting displayed items from a menu 

Page 6-3

•  By selecting harmonic orders in ALL display 

Page 6-5

•  By resetting the order of displayed items  

Page 6-5

Procedure

Using the Function Select Menu to Change the Displayed Items

You can change the display of wiring units; elements; and functions U, I, P, S, Q, 

λ

, 

f

, 

WP, q, TIME, FU, FI, and 

η

 using the function select menu.

Selecting the Item to Change

1.

  Use the 

cursor keys

 to select the item that you want to change. The selected 

item is highlighted.

In the Single List and Dual List displays, move the cursor to the center or left of the screen.

Current cursor location

Display Examples

• Single List display

Current cursor location

• Dual List display

Changing a Measurement Function

2.

  Press 

SET

 to display the function select menu.

3.

  Use the 

cursor keys

 to select a group of measurement functions you want to 

display from U/I/P, S/Q/

λ

/

f

, WP/q/Time, FU/FI/

η

, and rms/mean/dc/rmean/ac.

4.

  Press 

SET

. For example, if U/I/P is selected, the measurement function that is 

displayed switches in this order each time you press SET: U > I > P.

When the display mode is set to Single List or Dual List, only the measurement functions 
that contain harmonic order data can be selected. Press U/I/P to select U, I, or P. Press  
S/Q/

λ

/

f

 to select S, Q, 

λ

, 

f

, 

f

U, or 

f

I.

Summary of Contents for WT500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands