YOKOGAWA WT500 User Manual Download Page 153

Page: 153 / 360

5-27

IM 760201-01E

Power Measurement

App

Index

Setting the Integration Timer

Use the

cursor keys

to select one of the Integ Timer boxes (hour, minute, or

second).

Press

SET

to display an entry box.

10.

Use the

cursor keys

to set the hour, minute, or second that you selected in step 8.

11.

Press

SET

ESC

to close the entry box.

12.

Repeat steps 8 to 11 to set the hour, minute, and second.

Setting the Scheduled Start and End Times

13.

Use the

cursor keys

to select one of the Real-time Control integration start time

boxes (year, month, day, hour, minute, or second).

14.

Press

SET

to display an entry box.

15.

Use the

cursor keys

to set the year, month, date, hour, minute, or second that

you selected in step 13.

16.

Press

SET

ESC

to close the entry box.

17.

Repeat steps 13 to 16 to set the year, month, date, hour, minute, and second.

18.

Use the

cursor keys

to select one of the Real-time Control integration end time

boxes (year, month, day, hour, minute, or second).

19.

Repeat steps 14 to 17 to set the year, month, date, hour, minute, and second.

20.

Press

ESC

twice to close the entry box and the setup menu.

5.9 Setting Real-Time Integration or Real-Time Continuous Integration

Summary of Contents for WT500









































































































































































































































































































































































Search results

Summary of Contents for WT500

Reviews:

Related manuals for WT500

Brands by name

Popular brands

YOKOGAWA WT500, User Manual

Search results

Summary of Contents for WT500

Reviews:

Related manuals for WT500

Brands by name

Popular brands