5-5
IM 760201-01E
Power Measurement
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
Resetting the Displayed Item Order
1.
Press
ITEM
to display the Numeric menu.
2.
Use the
cursor keys
to select Reset Items Exec.
3.
Press
SET
. An Alert dialog box appears.
4.
Use the
cursor keys
to select OK or Cancel.
5.
If you select OK and press
SET
, the orders of the displayed items on all pages will
be reset.
If select Cancel and press
SET
, the order of the displayed items will not be reset.
Explanation
The following is an example of the numeric value display:
The color changes from green to red if the input signal level
exceeds approximately three or six times the specified
measurement range when the crest factor is set to 3 or 6,
respectively. The first and second lines correspond to
voltage and current, respectively. The conditions of the input
signals of elements 1 to 3 are displayed in numeric order
from the left.
Page bar
The current page is
highlighted. If page scrolling
is possible using PAGE or
PAGE , the top and bottom
sections of the page bar
show / . If page scrolling
is not possible, / is
shown.
Data update count
• The data update count is displayed under Update in the lower left corner
of the screen.
• Press HOLD to hold the data update count.
Press HOLD again to un-hold it.
• When the value exceeds 65535, it returns to zero.
• The data update count is reset to zero if the power is turned off or
if a setting such as the measurement range or filter is changed.
Displayed when the
displayed item can
be changed using
the function select
key. The item that
can be changed is
also highlighted.
Measurement function
Data
5.2 Displaying Numeric Data and Changing Displayed Items
