YOKOGAWA WT500 User Manual Download Page 187

Page: 187 / 360

6-17

IM 760201-01E

Harmonic Measurement (Optional)

App

Index

Measuring with Cursors

Press

SHIFT+FORM(CURSOR)

to display the Cursor menu.

• Selecting Whether or Not to Use Cursor Measurement

Use the

cursor keys

to select Bar Cursor.

Press

SET

to select ON or OFF. If you select ON, the results of cursor

measurement are displayed.

• Moving the Cursors

Use the

cursor keys

to select Position C1 + or Position C2 x.

Press

SET

to display the cursor position selection box for Position C1 + or

Position C2 x.

Use the

cursor keys

to set the position in terms of the harmonic order.

• Select Position C1 + to move the position of .
• Select Position C2 x to move the position of cursor x.

10.

Press

SET

ESC

to close the cursor position selection box.

• Linking Cursors

11.

Use the

cursor keys

to select Linkage.

12.

Press

SET

. The linkage indicator lights and the cursor settings are linked.

When Linkage is enabled, the distance between and cursor x is maintained. When
you change the position of one cursor, the position of the other cursor also changes.

Linkage indicator

6.7 Displaying Bar Graphs and Making Cursor Measurements

Summary of Contents for WT500









































































































































































































































































































































































Search results

Summary of Contents for WT500

Reviews:

Related manuals for WT500

Brands by name

Popular brands

YOKOGAWA WT500, User Manual

Search results

Summary of Contents for WT500

Reviews:

Related manuals for WT500

Brands by name

Popular brands