YOKOGAWA UV700G, User Manual

Page: 120 / 131

<App.2 Installation>
App.2-3
IM 12K01B02-01E
App.2.3.4 Pole stand assembly
1. Use four M8 bolts to prevent the mount from moving.
Make sure to locate the earth logo on the mount at the front left (looking from the front).
2. Use two U bolts to attach the detector mount to the pole as shown below.
Make sure that there is a 350 mm to 500 mm distance between the mount and floor.
(450 mm is recommended.)
U bolts
M8 flat washer
M8 SW
M8 nut
Detector mount
Attach the mount 350 mm to 500 mm
above the floor.
Mount
Earth logo
Fig.4 Detector mount installation
App.2.3.5 Measuring tank assembly
1. Attach the measuring tank included in the meter to the detector mount using four M8 3 16
bolts.
Make sure to locate the thicker drain of the pipe on the right (looking from the front).
M8 3 16 bolts
M8-washer
Drain
Front
Fig.5 Measuring tank assembly
2. Remove the four butterfly nuts, attach the blind plate and reattach the butterfly nuts.
Butterfly nuts (four nuts)
Blind plate
Fig.6 Blind plate installation