YOKOGAWA UV700G, User Manual

Page: 13 / 131

<1. Overview>
1-4
IM 12K01B02-01E
1.2.2 Display
This section describes the parameters shown on a typical display:
• The display is touch panel. Do not press buttons with wet hands, or a sharp object such as a
pen tip or a screwdriver.
• If no buttons are pressed for a certain period of time, the backlight turns OFF.
• If no buttons are pressed for about two hours on displays other than those for measurement,
data or alarm, the display turns to the measurement display.
l
Example of display-Displaying measurement readings
The display shows measurement readings.
1
3
4
5
6
7
9
8
2
NO. Display example Description
1
MEAS., SETTING, LOG DATA, etc. Title of display
2 2004/01/30 09:57 Clock
3 Abs, CONC, etc. Items to be measured
4 Instantaneous values Readings
5
Conversion factors for COD, etc. Conversion factor
6 MAINTENANCE, CAL, etc. Operation buttons
7
WARM UP!: Unit is being warmed up. Status of unit
8 Range Range
9 Abs, CONC, etc. Switchable measurement items
WARM UP!
When the power is turned ON, “WARM UP!” is displayed. This will disappear after one hour.