YOKOGAWA PX8000 User Manual Download Page 169

Page: 169 / 202

22-25

IM PX8000-02EN

Deleting Files and Folders (Delete)

Select the file or folder that you want to delete from the file list.

Select

Delete

on the operation menu to display the following screen.

Confirm execution.

Delete files and folders.

File that you want to delete

Note

• To delete multiple files or folders that are in the file list at the same time, move the cursor to the file or

folder that you want to delete, and then carry out the following operations.

Files: Press

SET

or the

SET/RESET

soft key on the Utility menu.

Folders: Press the

SET/RESET

soft key on the FILE Utility menu. If the cursor is on a folder, pressing

SET

will open the folder. All the files and folders that you have selected up to that point will be

canceled.

• You can abort file deleting. However, files that are already being processed are not applicable.

Renaming Files and Folders (Rename)

Select the file or folder that you want to rename from the file list.

Select

Rename

on the operation menu to display the following screen.

Use the keyboard to input the new file or folder name.

File that you want to rename.

Rename files and folders.

Press

ENTER

on the keyboard or the

Enter

soft key to

confirm the name you entered.

22.10 File Operations

Summary of Contents for PX8000











































































































































































































Search results

Summary of Contents for PX8000

Reviews:

Related manuals for PX8000

Brands by name

Popular brands

YOKOGAWA PX8000, User Manual

Search results

Summary of Contents for PX8000

Reviews:

Related manuals for PX8000

Brands by name

Popular brands