YOKOGAWA PX8000 User Manual Download Page 71

Page: 71 / 202

6-1

IM PX8000-02EN

6.1 Switching the Displayed Page

This section explains how to switch the displayed numeric data page.

► Features Guide: “Numeric Data Display Settings”

“Switching the Displayed Page”

NUMERIC SETTING menu

Use the

DISPLAY MODE

and

DISPLAY SETTING

keys as explained in section 5.1 to display

the NUMERIC SETTING menu.

* These settings are available on models with the harmonic measurement (/G5) option.

Set the display format

(4 Items, 8 Items, 16 Items, Matrix, All Items, Hrm Single List,*

Hrm Dual List,* Custom).

Set the display format, and then press

ESC

to clear the menu.

Note

If every numeric data is displayed as no data (−−−−−−−), check the following items.
• Is waveform acquisition running?

► section 4.2

• Is the numeric measurement setting set to ON?

► section 7.1

• Is the trigger set properly?

Trigger mode

► section 3.1

Trigger position and trigger delay

► section 3.2

Trigger hold off

► section 3.3

Trigger conditions according to trigger type

► sections 3.4 to 3.15

Chapter 6

Numeric Data Display

Summary of Contents for PX8000











































































































































































































Search results

Summary of Contents for PX8000

Reviews:

Related manuals for PX8000

Brands by name

Popular brands

YOKOGAWA PX8000, User Manual

Search results

Summary of Contents for PX8000

Reviews:

Related manuals for PX8000

Brands by name

Popular brands