YOKOGAWA PX8000 User Manual Download Page 172

Page: 172 / 202

22-28

IM PX8000-02EN

FILE Utility Menu

When copying or

deleting multiple files

Displays file information

Select all or unselect all

Select or unselect

Turns protection on or off

Cancels the copy or delete operation.

Protected file

Turning

Protection On or Off (Protect ON/OFF)

These soft keys turn protection on and off for the selected file. The change is reflected in the file

attributes, displayed under the Attr column in the file list.

Protection

File Attribute

Description

File protection is on for the selected file. The file can be read from. Writing

is not allowed. Deleting is also not allowed.

OFF

r/w

File protection is off for the selected file. The file has read and write access.

ALL SET and ALL RESET

ALL SET: When a medium, folder, or file is highlighted in the file list, pressing this soft key

selects all the files and folders in the corresponding medium or folder. Selection
marks (see page 16-19) are displayed to the left of the selected files and folders.

ALL RESET: Pressing this soft key clears all the selected files and folders.

SET/RESET

This soft key selects the file or folder in the file list that is highlighted or clears the selection.

Selection marks (see page 22-22) are displayed to the left of the selected files.

22.10 File Operations

Summary of Contents for PX8000











































































































































































































Search results

Summary of Contents for PX8000

Reviews:

Related manuals for PX8000

Brands by name

Popular brands

YOKOGAWA PX8000, User Manual

Search results

Summary of Contents for PX8000

Reviews:

Related manuals for PX8000

Brands by name

Popular brands