YOKOGAWA PX8000 User Manual Download Page 152

Page: 152 / 202

22-8

IM PX8000-02EN

Setting Auto Naming (Auto Naming)

OFF: The auto naming feature is disabled. The name that you specify using the File Name

setting is used. If there is a file with the same name in the save destination folder, you
cannot save the data.

Numbering: The PX8000 automatically adds a four-digit number between 0000 to 9999 after the

common name specified using the File Name setting (up to four characters) when it
saves files.

Date: The file name is the date and time (down to ms) when the file is saved. The file name

specified for the File Name setting is ignored.

Year

Month

Day

Hour

Minute

Second

20131030_121530_100_000 (2013/10/30 12:15:30.100)

Numbering when a single file

exceeds 2 GB (000-999)

Regardless of whether the auto naming feature is set to OFF, Numbering, or Date, if the data size

of a single file exceeds 2 GB, an underscore and a three-digit sequence number (000 to 999) is
appended to the file name. The sequence number is incremented by one each time a file is added.
This is appended only if the file exceeds 2 GB.

Setting the Comment (Comment)

You can add a comment that consists of up to 120 characters when you save a file. You do not have

to enter a comment. All characters, including spaces, can be used in comments.

Setting the Waveform Save Conditions (Waveform Save Setup)

Press the

Waveform Save Setup

soft key to display the following screen.

Set these when Data Type is set to ASCII.

Interval (data removal interval): OFF, Per5, Per10, Per20, Per50, Per100, Per200, Per500,

Per1000, Per2000, Per5000

Time Info. (whether to save time information): OFF, ON
Extension (file name extension): csv, MATLAB*
Decimal Point (decimal point): Point, Comma

* If MATLAB is selected, the extension will be set to .TXT.

Select the waveforms that you want to save.

History data range of the waveforms to be saved (One, All)

Select All ON.

All displayed waveforms are saved

regardless of whether the individual

waveforms in the table below are

selected.

Math1 to Math8

Set these when Data Type is set to

ASCII or Float. These do not appear for

Binary or WDF Binary.

Set this when Data Type is set to Binary, ASCII, or FLOAT.

This is fixed to One for WDF Binary.

22.3 Saving Waveform Data

Summary of Contents for PX8000











































































































































































































Search results

Summary of Contents for PX8000

Reviews:

Related manuals for PX8000

Brands by name

Popular brands

YOKOGAWA PX8000, User Manual

Search results

Summary of Contents for PX8000

Reviews:

Related manuals for PX8000

Brands by name

Popular brands