IM 1E10C1-E
11-7
11. PARAMETER LIST
11.2 Parameters for HART Communicator
This chapter describes ADMAG SE parameters for HART Communicator. Note the
differences between parameters on ADMAG SE indicator and those on HART Commu-
nicator.
●
Description of Items
Name
Data Range,
Units
Default
Value
Indicator
of SE
R/W
Description
Parameter name
Equivalent ADMAG SE indicator parameter
number
R: Read only W: Write enabled
Describes the nature of the parameter.
For numeric values, settable ranges are shown.
For selection items, selectable items are shown.
The figure in ( ) shows the number for selecting
data on ADMAG SE indicator. The described
number can be entered when ADMAG SE
indicator is in the setting mode.
Default value is shown.
*As for “Span”, “Pulse unit”, “Pulse scale”,
“Total unit” and “Total scale”, the data specified
at order have been already set.
