Yealink SIP-T29G User Manual Download Page 2 | Manualshive

Page: 2 / 206

background image

Copyright © 2015 YEALINK NETWORK TECHNOLOGY CO., LTD.

Copyright © 2015 Yealink Network Technology CO., LTD. All rights reserved. No parts of this
publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, photocopying, recording, or otherwise, for any purpose, without the express written
permission of Yealink Network Technology CO., LTD. Under the law, reproducing includes
translating into another language or format.

When this publication is made available on media, Yealink Network Technology CO., LTD. gives
its consent to downloading and printing copies of the content provided in this file only for private
use but not for redistribution. No parts of this publication may be subject to alteration,
modification or commercial use. Yealink Network Technology CO., LTD. will not be liable for any
damages arising from use of an illegally modified or altered publication.

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS.

YEALINK NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink Network Technology
CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance, or use of this guide.

Hereby, Yealink Network Technology CO

.,

LTD. declares that this phone is in conformity

with the essential requirements and other relevant provisions of the CE, FCC.

This device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.

Any Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

«
1
2
3
4
...
»

Summary of Contents for SIP-T29G















































































































































































































Reviews:

No comments

Related manuals for SIP-T29G

Brand: M4TEL Pages: 22

Brand: Icemobile Pages: 19

Brand: meanIT Pages: 26

Brand: Audiovox Pages: 137

Brand: Diamond Tech Pages: 38

Brand: Watchguard Pages: 12

Sprint Treo 800w

Brand: Treo Fitness Pages: 4

2 VOICE 1083/58

Brand: urmet domus Pages: 60

Brand: IPRO Pages: 53

Brand: Wherify Pages: 37

Brand: Haier Pages: 85

Brand: Haier Pages: 66

Brand: Motorola Pages: 46

D2303/D2305/D2306

Brand: Sony Pages: 19

COM-1/B - Mylo Personal Communicator

Brand: Sony Pages: 2

Brand: Sony Pages: 12

Brand: Sony Pages: 14

Brand: Sony Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands