Yealink SIP-T29G User Manual Download Page 115

Page: 115 / 206

Basic Call Features

105

In the DND block, mark the desired radio box in the Mode field.

Click Confirm to accept the change.

Note

To activate DND in phone mode:

Press the DND soft key when the phone is idle.

The icon on the status bar indicates that DND is enabled.

Incoming calls will be rejected automatically and "n New Missed Call(s)" ("n"
indicates the number of missed calls) will appear on the LCD screen.

Note

DND mode is configurable via web user interface only.

When DND and busy forward are enabled in phone mode, calls will be sent to the

configured destination number. For more information on busy forward, refer to

Call

Forward

on page

108

Summary of Contents for SIP-T29G















































































































































































































Search results

Summary of Contents for SIP-T29G

Reviews:

Related manuals for SIP-T29G

Brands by name

Popular brands

Yealink SIP-T29G, User Manual

Search results

Summary of Contents for SIP-T29G

Reviews:

Related manuals for SIP-T29G

Brands by name

Popular brands