Yealink SIP-T29G User Manual Download Page 182

Page: 182 / 206

User Guide for the SIP-T29G IP Phone

172

To send a text message:

Press Menu->Message->Text Message->New Message.

Compose the new text message. You can press the abc soft key to change the input
mode.

Press the Send soft key.

(Optional.) Press or , or the Switch soft key to select the desired account
from the From field.

Enter the number you want to send the message to in the To field.

Press the Send soft key to send the message or the Back soft key to cancel.

Sending a text message is configurable via web user interface at the path
Features->SMS.

To reply a text message:

Press Menu->Message->Text Message->Inbox.

Select the desired message and press the Reply soft key.

Compose the new text message. You can press the abc soft key to change the input
mode.

Press the Send soft key after completing the content.

Check the From and To fields, and then press the Send soft key.

To delete a text message:

Press Menu->Message->Text Message->Inbox (Sentbox, Outbox or Draftbox).

Summary of Contents for SIP-T29G















































































































































































































Search results

Summary of Contents for SIP-T29G

Reviews:

Related manuals for SIP-T29G

Brands by name

Popular brands

Yealink SIP-T29G, User Manual

Search results

Summary of Contents for SIP-T29G

Reviews:

Related manuals for SIP-T29G

Brands by name

Popular brands