Yealink SIP-T29G User Manual Download Page 16

Page: 16 / 206

User Guide for the SIP-T29G IP Phone

Icons

Description

Park failed

Park successfully

Record
Voice Mail
Intercom
Transfer
Forward
Conference
Hold
DND
ReCall
SMS
URL Record
Group Listening
Zero Touch

Power Indicator LED

LED Status

Description

Solid red

The phone is initializing.

Fast flashing red (300ms)

The phone is ringing.

Slow flashing red (1s)

The phone receives a voice mail or text message.

Off

The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold or is held.
The call is muted.

Line key LED

LED Status

Description

Solid green

The line is seized.
The line is in conversation.

Fast flashing green

The line receives an incoming call.

Slow flashing green

The call is placed on hold.

Off

The line is inactive.

Summary of Contents for SIP-T29G















































































































































































































Search results

Summary of Contents for SIP-T29G

Reviews:

Related manuals for SIP-T29G

Brands by name

Popular brands

Yealink SIP-T29G, User Manual

Search results

Summary of Contents for SIP-T29G

Reviews:

Related manuals for SIP-T29G

Brands by name

Popular brands