User Guide for the SIP-T29G IP Phone
144
Paging Priority Active
The paging priority active parameter decides how the phone handles incoming
multicast paging calls when there is already a multicast paging call on the phone. If
enabled, the phone will ignore incoming multicast paging calls with lower priorities,
otherwise, the phone will answer incoming multicast paging calls automatically and
place the previous multicast paging call on hold. If disabled, the phone will
automatically ignore all incoming multicast paging calls.
To configure multicast listening addresses via web user interface:
1.
Click on Directory->Multicast IP.
2.
Select the desired value from the pull-down list of Paging Barge.
3.
Select the desired value from the pull-down list of Paging Priority Active.
4.
Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:10008) which
the phone listens to for incoming RTP multicast in the Listening Address field.
5.
Enter the label in the Label field.
Label will appear on the LCD screen when receiving the multicast RTP stream.
6.
Click Confirm to accept the change.
Note
To send RTP stream via a multicast paging key when the receiver’s phone is idle:
1.
Press the multicast paging key when the phone is idle.
The phone sends RTP to a preconfigured multicast address (IP: Port).
The priorities of listening addresses are predefined: 1 with the highest priority, 10 with the
lowest.
Multicast listening addresses are configurable via web user interface only.
Summary of Contents for SIP-T29G
