Yealink SIP-T29G User Manual Download Page 125

Page: 125 / 206

Basic Call Features

115

To configure the forward authorized numbers via web user interface:

Click on Features->Forward & DND.

Select Enabled from the pull-down list of Forward Emergency.

Enter the numbers in the Forward Authorized Numbers field.

For multiple numbers, enter a comma between every two numbers.

Click Confirm to accept the change.

When call forward is enabled on the phone, the phone cannot forward incoming
calls from the numbers specified in the Forward Authorized Numbers field.

Note

To disable call forward in phone mode:

Do one of the following:

Press when the phone is idle.

Press Menu->Features->Call Forward.

Press or to select the desired forwarding type and then press the Enter
soft key.

Press or , or the Switch soft key to select Disabled to disable the call
forward.

Press the Save soft key to accept the change.

Forward authorized number is configurable via web user interface only.

Summary of Contents for SIP-T29G















































































































































































































Search results

Summary of Contents for SIP-T29G

Reviews:

Related manuals for SIP-T29G

Brands by name

Popular brands

Yealink SIP-T29G, User Manual

Search results

Summary of Contents for SIP-T29G

Reviews:

Related manuals for SIP-T29G

Brands by name

Popular brands