Yealink SIP-T2 Series, Administrator'S Manual

Page: 156 / 1009

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
134
Parameters Permitted Values Default
wifi.X.ssid
(X ranges from 1 to 5)
String within 32
characters
Blank
Description:
Configures the Service Set Identifier (SSID) of the wireless network X.
SSID is a unique identifier for accessing wireless access points.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled). It
is only applicable to SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->SSID
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->SSID
wifi.X.priority
(X ranges from 1 to 5)
Integer from 1 to 5 1
Description:
Configures the priority for the wireless network X for the IP phone.
5 is the highest priority, 1 is the lowest priority.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled). It
is only applicable to SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Change Priority
Phone User Interface:
None
wifi.X.security_mode
(X ranges from 1 to 5)
NONE, WEP, WPA-PSK
or WPA2-PSK
NONE
Description:
Configures the security mode of the wireless network X.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled). It
is only applicable to SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Security Mode
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Security Mode
wifi.X.cipher_type
NONE, WEP, TKIP, CCMP
NONE