Yealink SIP-T2 Series, Administrator'S Manual

Page: 623 / 1009

Configuring Advanced Features
601
Event Description
UnHeld When a held call is resumed.
Mute When the IP phone mutes a call.
UnMute When the IP phone un-mutes a call.
Missed Call When the IP phone misses a call.
IP Changed When the IP address of the IP phone changes.
Idle To Busy
When the state of the IP phone changes from idle to
busy.
Busy To Idle When the state of phone changes from busy to idle.
Reject Incoming Call When the IP phone rejects an incoming call.
Answer New-In Call When the IP phone answers a new call.
Transfer Failed When the IP phone fails to transfer a call.
Transfer Finished When the IP phone completes to transfer a call.
Forward Incoming Call When the IP phone forwards an incoming call.
Autop Finish
When the IP phone completes auto provisioning via
power on.
Open Call Waiting When the IP phone enables the call waiting.
Close Call Waiting When the IP phone disables the call waiting.
Headset
When the IP phone presses the HEADSET key (not
applicable to CP860 IP phones).
Handfree
When the IP phone presses the Speakerphone key (not
applicable to CP860 IP phones).
Cancel Call Out
When the IP phone cancels an outgoing call in the
ring-back state.
Remote Busy When an outgoing call is rejected.
Call Remote Canceled
When the remote party cancels the outgoing call in the
ringing state.
An HTTP or HTTPS GET request may contain variable name and variable value,
separated by “=”. Each variable value starts with $ in the query part of the URL. The
valid URL format is: http(s)://IP address of server/help.xml?variable name=$variable
value. Variable name can be custom by users, while the variable value is pre-defined.
For example, a URL “
http://192.168.1.10/help.xml?mac=$mac ” is specified for the event
Mute, $mac will be dynamically replaced with the MAC address of the IP phone when
the IP phone mutes a call.