Yealink SIP-T2 Series, Administrator'S Manual

Page: 109 / 1009

Getting Started
87
3. Enter the user name and password in corresponding fields.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click OK to reboot the phone.
To configure PPPoE via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->WAN Port->IPv4->PPPoE IPv4 Client.
2. Enter the user name and password in corresponding fields.
3. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
Yealink SIP VP-T49G/SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T27G/T23P/T23G/T21(P)
E2/T19(P) E2 IP phones support two Ethernet ports: Internet port and PC port. The CP860
IP phones have Internet port only. Three optional methods of transmission configuration
for IP phone Internet or PC Ethernet ports:

Auto-negotiate

Half-duplex

Full-duplex
Auto-negotiate is configured for both Internet and PC ports on the IP phone by default.
Auto-negotiate
Auto-negotiate means that two connected devices choose common transmission