Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
296
Parameters
Permitted Values
Default
Description:
Enables or disables the auto answer feature for IP call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone can automatically answer IP call.
Note: It works only if the value of the parameter "features.direct_ip_call_enable" is
set to 1 (Enabled). The IP phone cannot automatically answer the incoming IP call
during a call even if IP call auto answer is enabled.
Web User Interface:
Feature->General Information->IP Direct Auto Answer
Phone User Interface:
None
To configure IP direct auto answer via web user interface:
1.
Click on Features->General Information.
2.
Select the desired value from the pull-down list of IP Direct Auto Answer.
3.
Click Confirm to accept the change.
Allow IP Call feature allow IP phones to receive or place an IP address call. You can
neither receive nor place an IP address call if allow IP call feature is disabled.
Summary of Contents for SIP-T2 Series
