Yealink SIP-T2 Series, Administrator'S Manual

Page: 648 / 1009

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
626
Parameter Permitted Values Default
Web User Interface:
None
Phone User Interface:
None
features.action_uri_limit_ip IP address or any Blank
Description:
Configures the IP address of the server from which the IP phone receives the action
URI requests.
For discontinuous IP addresses, multiple IP addresses are separated by commas.
For continuous IP addresses, the format likes *.*.*.* and the “*” stands for the values
0~255.
For example: 10.10.*.* stands for the IP addresses that range from 10.10.0.0 to
10.10.255.255.
If left blank, the IP phone
will
reject any HTTP GET request.
If it is set to “any”, the IP phone will accept and handle HTTP GET requests from any
IP address.
Example:
features.action_uri_limit_ip = any
Note: It works only if the value of the parameter “features.action_uri.enable” is set
to 1 (Enabled).
Web User Interface:
Features->Remote Control->Action URI allow IP List
Phone User Interface:
None
To configure the trusted IP address(es) for action URI via web user interface:
1. Click on Features->Remote Control.
2. Enter the IP address or any in the Action URI allow IP List field.