Yealink SIP-T2 Series, Administrator'S Manual

Page: 103 / 1009

Getting Started
81
Parameters Permitted Values Default
Description:
Configures the IPv4 address.
Example:
network.internet_port.ip = 192.168.1.20
Note: It works only if the value of the parameter “network.ip_address_mode” is set to
0 (IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 2 (Static IP
Address). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->IP Address
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv4->Static IPv4 Client->IPv4
network.internet_port.mask Subnet Mask Blank
Description:
Configures the IPv4 subnet mask.
Example:
network.internet_port.mask = 255.255.255.0
Note: It works only if the value of the parameter “network.ip_address_mode” is set to
0 (IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 2 (Static IP
Address). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Subnet Mask
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv4->Static IPv4 Client->Subnet Mask
network.internet_port.gateway IPv4 Address Blank
Description:
Configures the IPv4 default gateway.
Example:
network.internet_port.gateway = 192.168.1.254
Note: It works only if the value of the parameter “network.ip_address_mode” is set to
0 (IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 2 (Static IP