Yealink SIP-T2 Series, Administrator'S Manual

Page: 882 / 1009

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
860
Parameters Permitted Values Default
Settings->Configuration->Export System Log
Phone User Interface:
None
syslog.server
IP address or
domain name
Blank
Description:
Configures the IP address or domain name of the syslog server when exporting log
to the syslog server.
Example:
syslog.server = 192.168.1.100
Note: It works only if the value of the parameter “syslog.mode” is set to 1 (Server).
If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Settings->Configuration->Server Name
Phone User Interface:
None
To configure the phone to export the system log to a syslog server via web user
interface:
1. Click on Settings->Configuration.
2. Mark the Server radio box in the Export System Log field.
3. Enter the IP address or domain name of the syslog server in the Server Name field.