Yealink SIP-T2 Series, Administrator'S Manual

Page: 825 / 1009

Configuring Video Features
803
Parameters
Permitted
Values
Default
When Y=2, the default value is H264;
When Y=3, the default value is H264;
When Y=4, the default value is H263;
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
Account->Codec->Video Codec
Phone User Interface:
None
account.X.video.Y.priority
(X ranges from 1 to 16, Y ranges from 1 to 4)
1, 2, 3 or 4
Refer to the
following content
Description:
Configures the priority of the enabled video codec for account X.
Default:
When Y=1, the default value is 2;
When Y=2, the default value is 3;
When Y=3, the default value is 1;
When Y=4, the default value is 4;
Example:
account.1.video.1.priority = 2
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
Account->Codec->Video Codec
Phone User Interface:
None
To configure the video codecs and adjust the priority of the enabled video codecs on a
per-account basis via web user interface:
1. Click on Account->Codec.
2. Select the desired account from the pull-down list of Account.
3. In the Video Codecs field, select the desired codec from the Disable Codecs
column and then click .
The selected codec appears in the Enable Codecs column.
4. Repeat the step 3 to add more codecs to the Enable Codecs column.
5. To remove the codec from the Enable Codecs column, select the desired codec
and then click .