Yealink SIP-T2 Series, Administrator'S Manual

Page: 157 / 1009

Configuring Basic Features
135
Parameters Permitted Values Default
(X ranges from 1 to 5) or TKIP CCMP
Description:
Configures the encryption type of the wireless network X.
NONE-NONE
WEP-WEP
TKIP-TKIP
CCMP-AES
TKIP CCMP-TKIP AES
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled)
and “wifi.X.security_mode” is set to WPA-PSK or WPA2-PSK. It is only applicable to
SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Cipher Type
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Cipher Type
wifi.X.password
(X ranges from 1 to 5)
String within 64
characters
Blank
Description:
Configures the password of the wireless network X.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled)
and “wifi.X.security_mode” is set to WEP, WPA-PSK or WPA2-PSK. It is only applicable
to SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->PSK
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->WPA Shared Key
wifi.status_detection_timeout
Integer more than or
equal to 0
120
Description:
Configures the delay time (in seconds) for the phone to disconnect the wireless
network after failing to detect the wi-fi signal (Beacon) from the router.
If it is set to 120, the IP phone will automatically disconnect the wireless network
when detecting no wi-fi signal (Beacon) sent from the router within 120 seconds.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled). It
is only applicable to SIP VP-T49G IP phones.