manualshive.com logo in svg

Yealink MeetingEye 400, Administrator'S Manual

Share
Download
Yealink MeetingEye 400 Administrator'S Manual Download Page 236

 | Configuring the Security Features | 

236

Configuring the Auto Logout Time

The system will log out of the web user interface automatically after being inactive for a period of time. You
need to re-enter the login credentials to login. You can change the auto logo time.

Procedure

1.

On your web user interface, go to 

Setting

 > 

General

 > 

General Information

 >

ReLogOffTime(1-1000min)

.

2.

Configure and save the following settings:

Parameter

Description

Configuration Method

ReLogOffTime (1-1000min)

Specify the inactive time
(minutes) before the system
logs out of the web user
interface automatically.

Default

: 5 minute.

Web user interface

Transport Layer Security (TLS)

Transport Layer Protocol (TLS) is a commonly used protocol for ensuring communications privacy and
managing the security of the message transmission. When secured by the TLS protocol, the device can
transmit the data and communicate safely.

The TLS protocol includes two protocol groups: the TLS handshake protocol and the TLS record protocol.
The TLS handshake protocol allows the server and the client to authenticate with each other before
negotiating about the data, the encryption algorithms and the encrypted keys. The TLS Record Protocol
completes the actual data transmission and ensures the data integrity and confidentiality. The TLS protocol
uses an asymmetric encryption algorithm to exchange keys, a symmetric encryption algorithm to ensure
data confidentiality, and the MAC algorithms to ensure data integrity.

•

Supported Cipher Suites

•

TLS Transport Protocol

•

Managing the Trusted Certificates List

•

Managing the Server Certificates

•

Secure Real-Time Transport Protocol (SRTP)

•

H.235

•

Defending against Attacks

Supported Cipher Suites

The system supports TLS version 1.0, 1.1 and 1.2. A cipher suite is a named combination of
authentication, encryption, and message authentication code (MAC) algorithms used to negotiate the
security settings for a network connection by using the TLS/SSL network protocol. The system supports
the following cipher suites:

• DHE-RSA-AES256-SHA
• DHE-DSS-AES256-SHA
• AES256-SHA
• EDH-RSA-DES-CBC3-SHA
• EDH-DSS-DES-CBC3-SHA
• DES-CBC3-SHA

Summary of Contents for MeetingEye 400























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands