manualshive.com logo in svg

Yealink MeetingEye 400, Administrator'S Manual

Share
Download
Yealink MeetingEye 400 Administrator'S Manual Download Page 79

 | Configuring Network Settings | 

79

Configuring DHCP VLAN

Your system supports VLAN discovery via DHCP. When the VLAN discovery method is set to DHCP, the
system will examine DHCP option for a valid VLAN ID. The predefined option 132 is used to supply the
VLAN ID (it should be predefined on the DHCP server first) by default. The administrator can customize the
DHCP option used to request the VLAN ID.

Procedure

1.

On your web user interface, go to 

Network

 > 

Advanced

 > 

VLAN

 > 

DHCP VLAN

.

2.

Configure and save the following settings:

Parameter

Description

Configuration Method

Active/STUN Active

Enable or disable the DHCP
VLAN discovery feature on
the system.

Note

: the default value is On.

If you change this parameter,
the system will reboot to
make the change take effect.

Web user interface

Option

Specify the DHCP option
from which the system
obtains the VLAN settings.
You can configure at most 5
DHCP options and separate
them by commas.

Note

: the value can be any

integer from 128 to 254. The
default value is 132.

If you change this parameter,
the system will reboot to
make the change take effect.

Web user interface

802.1x Authentication

You can use 802.1x authentication to restrict the unauthorized devices to accessing the LAN. The 802.1x
authentication can be used to authenticate the devices connected to the port before the system obtains all
the businesses.

The system supports the following protocols for 802.1X authentication:

• EAP-MD5
• EAP-TLS (Device and CA certificates are required, password is not required)
• EAP-PEAP/MSCHAPv2 (CA certificates are required)
• EAP-TTLS/EAP-MSCHAPv2 (CA certificates are required)

For more information on 802.1X authentication, refer to 

Yealink 802.1X Authentication

.

•

Configuring the 802.1x Authentication

Summary of Contents for MeetingEye 400























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands