| Configuring Network Settings |
75
Parameter
Description
Configuration Method
Secondary DNS/Sec.DNS
Configure the secondary
DNS server assigned to the
system.
If you change this parameter,
the system will reboot to
make the change take effect.
Web user interface
Endpoint
CTP20
Related information
DHCP Options
The DHCP information with labels carries with the corresponding network and other control information.
The information is called option. After connected to the network, the device will broadcast the DISCOVER
request which carries the DHCP options of the network information. The DHCP server will replay the
corresponding option after receiving the request.
Note:
For more information on DHCP options, refer to
.
•
•
•
Supported DHCP Option of IPv4
The following table lists the DHCP options supported by Yealink VCS in IPv4 network.
Parameter
DHCP Options
Description
Subnet Mask
1
Specify the subnet mask of the
client.
Time Offset
2
Specify the offset between
the client subnet and the
Coordinated Universal Time
(UTC).
Router
3
Specify a list of IP addresses
for routers on the client’s
subnet.
Time Server
4
Specify a list of time servers
available to the client.
Domain Name Server
6
Specify a list of domain name
servers available to the client.
Host Name
12
Specify the name of the client.
Domain Server
15
Specify the domain name
that client should use when
resolving hostnames via DNS.
Network Time Protocol
Servers
42
Specify the list of NTP server
address available to the client.
Summary of Contents for MeetingEye 400
Page 1: ......
