manualshive.com logo in svg

Yealink MeetingEye 400, Administrator'S Manual

Share
Download
Yealink MeetingEye 400 Administrator'S Manual Download Page 239

 | Configuring the Security Features | 

239

•

Default Certificates

: The system has 36 built-in trusted certificates.

•

Custom Certificates

: You can upload up to 10 trusted certificates with the size no more than 5M to the

system. The format of the CA certificates must be .pem, .cer, .crt and .der.

Procedure

1.

On your web user interface, go to 

Security

 > 

Trusted Certs

.

2.

Configure and save the following settings:

Parameter

Description

Configuration Method

Only Accept Trusted
Certificates

Enable or disable the system
only trusting the server
certificates in the trusted
certificates list.

Note

: the default value is On.

If it is disabled, the system
can connect to the server no
matter whether the certificate
send by the system is valid or
not.

If it is 

enabled

, the system

will authenticate the server
certificate based on the
trusted certificates list. Only
when the authentication
succeeds, will the system
trust the server.

If you change this parameter,
the system will reboot to
make the change take effect.

Web user interface

Common Name Validation

Enable or disable the system
to mandatorily validate
the CommonName or
SubjectAltName of the server
certificate sent by the server.
This security verification rules
are compliant with 

RFC 2818

.

Note

: the default value is Off.

If you change this parameter,
the system will reboot to
make the change take effect.

Web user interface

Summary of Contents for MeetingEye 400























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands