manualshive.com logo in svg

Yealink MeetingEye 400, Administrator'S Manual

Share
Download
Yealink MeetingEye 400 Administrator'S Manual Download Page 20

 | Getting Started | 

20

Hardware of VC500/PVT950 Codec

VC500/PVT950 codec compresses outgoing video and audio data, transmits this information to the far site,
and decompresses incoming data.

VC500/PVT950 codec, compatible with different audio devices, supports 16:9 and 4:3 aspect ratios and
can adapt to the monitors automatically. The VC500/PVT950 camera can be panned (± 60 degrees range),
tilted (± 40 degrees range) and support 5 x optical zoom, white balance and automatic gain.

•

Front Panel of VC500/PVT950 Codec

•

Rear Panel of VC500 Codec

Front Panel of VC500/PVT950 Codec

The LED indicator in front of the camera indicates different camera status.

Related information

MeetingEye 600/MeetingEye 400/VC880/VC800/VC500/VC200/PVT980/ PVT950 LED Indicator

Summary of Contents for MeetingEye 400























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands