YASKAWA VIPA System 300S Manual Download Page 87

Page: 87 / 120

The GSD (Geräte-Stamm-Datei) is online available in the following language versions.

Further language versions are available on inquires:

Name

Language

SPEEDBUS.GSD

German (default)

SPEEDBUS.GSG

German

SPEEDBUS.GSE

English

The GSD files may be found at www.vipa.com at the "Service" part.

The integration of the SPEEDBUS.GSD takes place with the following proceeding:

Browse to www.vipa.com

Click to

‘Service

Download

GSD- and EDS-Files

Profibus’

Download the file Cx000023_Vxxx.

Extract the file to your work directory. The SPEEDBUS.GSD is stored in the direc-

tory VIPA_System_300S.

Start the hardware configurator from Siemens.

Close every project.

Select

‘Options

Install new GSD-file’

Navigate to the directory VIPA_System_300S and select

SPEEDBUS.GSD

an.

The SPEED7 CPUs and modules of the System 300S from VIPA may now be

found in the hardware catalog at PROFIBUS-DP / Additional field devices / I/O /

VIPA_SPEEDBUS.

6.2.3 Steps of project engineering

The following text describes the approach of the project engineering in the hardware con-

figurator from Siemens at an abstract sample.

The project engineering is separated into following parts:

Project engineering of the modules at the standard bus

Project engineering of the SPEED-Bus modules in a virtual master system

(speedbus.gsd required)

For the employment of the System 300S modules at the SPEED-Bus you have to include

the System 300S modules into the hardware catalog via the GSD-file speedbus.gsd from

VIPA.

Installation of the

SPEEDBUS.GSD

Preconditions

VIPA System 300S

Digital Modules FAST - SPEED-Bus

Project engineering > Steps of project engineering

HB140 | SM-DIO | | en | Rev. 16-43

Summary of Contents for VIPA System 300S

























































































































Search results

Summary of Contents for VIPA System 300S

Reviews:

Related manuals for VIPA System 300S

Brands by name

Popular brands

YASKAWA VIPA System 300S, Manual

Search results

Summary of Contents for VIPA System 300S

Reviews:

Related manuals for VIPA System 300S

Brands by name

Popular brands