10.5 Motion Parameter Details
10.5.2 Setting Parameter List
10-44
OW
3D
Inverter User Constant Number Size
Setting range: 1 to 4 (words)
Set the size of the user constant to read by execut-
ing the Read User Constant command, or set the
size of the user constant to write by executing the
Write User Constant command, in words.
Each inverter user constant is composed of one
word. Therefore, setting the Inverter User Constant
Number Size enables the reading or writing of data
of 1 to 4 consecutive words at once.
OW
3E
Inverter User Constant
Set Point 1
Setting range: 0 to 65,535 (FFFFH)
Set the data to write for the Write User Constant
command.
Enabled when Inverter User Constant Number Size
= 1 to 4
OW
3F
Inverter User Constant
Set Point 2
Setting range: 0 to 65,535 (FFFFH)
Set the data to write for the Write User Constant
command.
Enabled when Inverter User Constant Number Size
= 2 to 4.
OW
40
Inverter User Constant
Set Point 3
Setting range: 0 to 65,535 (FFFFH)
Set the data to write for the Write User Constant
command.
Enabled when Inverter User Constant Number Size
= 3 or 4.
OW
41
Inverter User Constant
Set Point 4
Setting range: 0 to 65,535 (FFFFH)
Set the data to write for the Write User Constant
command.
Enabled when Inverter User Constant Number Size
= 4.
OW
42
Auxiliary Inverter User Constant Number
Setting range: 0 to FFFFH
Set the leading number of user constants to read
by executing the Read User Constant subcom-
mand, or the leading number of user constants to
write by executing the Write User Constant sub-
command.
Note: Set the register number used for MEMO-
BUS communications.
OW
43
Auxiliary Inverter User Constant Size
Setting range: 1 to 4 (words)
Set the size of the user constant to read by execut-
ing the Read User Constant subcommand, or set
the size of the user constant to write by executing
the Write User Constant subcommand, in words.
Each inverter constant is composed of one word.
Therefore, setting the Inverter User Constant Num-
ber Size enables the reading or writing of data of 1
to 4 consecutive words at once.
OW
44
Auxiliary Inverter User Constant
Set Point 1
Setting range: 0 to 65,535 (FFFFH)
Set the data to write for the Write User Constant
subcommand.
Enabled when Auxiliary Inverter User Constant
Number Size = 1 to 4.
OW
45
Auxiliary Inverter User Constant
Set Point 2
Setting range: 0 to 65,535 (FFFFH)
Set the data to write for the Write User Constant
subcommand.
Enabled when Auxiliary Inverter User Constant
Number Size = 2 to 4.
OW
46
Auxiliary Inverter User Constant
Set Point 3
Setting range: 0 to 65,535 (FFFFH)
Set the data to write for the Write User Constant
subcommand.
Enabled when Auxiliary Inverter User Constant
Number Size = 3 or 4.
Continued on next page.
Continued from previous page.
Register No.
Name
Description
Summary of Contents for SVC
Page 34: ...2 6 4 Reference Output Timing 2 20 2 6 5 Precautions When Combining with Other Modules 2 21...
Page 383: ...5 2 Absolute Encoders 5 2 6 Position Management Method for Each Machine Operation Type 5 42...
Page 387: ...5 2 Absolute Encoders 5 2 6 Position Management Method for Each Machine Operation Type 5 46...