4 Start-Up Programming & Operation
YASKAWA ELECTRIC
TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
59
S
tart-U
p
Prog
rammin
g
&
Op
er
at
io
n
4
■
LCD Display
Figure 31
Figure 31 LCD Display
Table 21 Display and Contents
11
LO/RE Light
Lit while the operator is selected to run the drive (LOCAL mode). Refer to page
for details.
12
ALM LED Light
Refer to ALARM (ALM) LED Displays on page 61
<1> The STOP key has highest priority. Pressing the STOP key will always cause the drive to stop the motor, even if an Up/Down command is
active at any external Up/Down command source. To disable the STOP key priority, set parameter o2-02 to 0.
<2> The LO/RE key can only switch between LOCAL and REMOTE when the drive is stopped. By default settings the LO/RE key function is
disabled. To allow using the LO/RE key for switching between LOCAL and REMOTE, set parameter o2-01 to 1.
No.
Name
Display
Content
1
Operation Mode Menus
MODE
Displayed when in Mode Selection.
MONITR
Displayed when in Monitor Mode.
VERIFY
Indicates the Verify Menu.
PRMSET
Displayed when in Parameter Setting Mode.
A.TUNE
Displayed during Auto-Tuning.
SETUP
Displayed when in Setup Mode.
2
Mode Display Area
DRV
Displayed when in Drive Mode.
PRG
Displayed when in Programming Mode.
3
Ready
Rdy
Indicates the drive is ready to run.
4
Data Display
–
Displays specific data and operation data.
5
Speed Reference Source
OPR
Displayed when the speed reference source is assigned to the LCD Operator.
COM
Displayed when the speed reference source is assigned to MEMOBUS/Modbus
Communication.
OP
Displayed when the speed reference is assigned to an option card.
6
LO/RE
Display
RSEQ
Displayed when the Up/Down command is supplied from a remote source.
LSEQ
Displayed when the Up/Down command is supplied from the operator keypad.
RREF
Displayed when the speed reference is supplied from a remote source.
LREF
Displayed when the speed reference is supplied from the operator keypad.
7
Function Key 1
(F1)
HELP
Pressing
displays the Help menu.
←
Pressing
scrolls
the
cursor to the left.
HOME
Pressing
returns to the top menu (Speed Reference).
ESC
Pressing
returns to the previous display.
No.
Display
Name
Function
LO
RE
- MODE -
U1-01= 0.00%
U1-02= 0.00%
U1-03= 0.00A
DRV
Speed Ref (OPR)
Rdy
RSEQ
LREF
FWD
FWD/REV
6
5
4
1
2
3
7
8
9
YEA_common
F1
F1
F1
F1
TOEP_C710616_38H_7_0.book 59 ページ 2015年11月11日 水曜日 午後7時40分